[Image 1]

Introduction

Hey it's a me again @drifter1! Today we continue with Physics and more specifically the branch "Classical Mechanics" to continue with the chapter of Equilibrium and Elasticity. In this article we will get into Cross-Sectional Stress and Strain. So, without further ado, let's dive straight into it!

Shear Stress

Shear stress arises from parallel forces that tend to cause deformation along a plane or planes parallel to imposed stress. What differentiates shear stress from "normal" stress is that "normal" stress arises from forces perpendicular to a cross-sectional area of the material, whilst shear stress is parallel to the cross-sectional area. Such forces cause the material to rotate about the application point.

Mathematically, the shear force per unit area on the face of a cross-section is defined as:

The most common symbol of shear stress is τ (tau). Shear stress is measured in force per unit area (N/m²) or pascals (Pa).

Shear Strain

The deflection of a point B per unit length, as a result of shear stress, is defined as shear strain. Its equal to the translation of point B, x, divided by the initial height of the material, L. Mathematically speaking:

Shear strain γ is positive when it causes the right angle of the 1st quadrant to decrease. In the same way, shear strain is negative if it causes that same angle to increase. The angle is measured in radians, which is a non-unit, making shear strain dimensionless.

Shear Modulus

In the same way as we defined Young's modulus for tensile stress and strain, and Bulk's modulus for volumetric stress and strain, we can also define a modulus for shear stress and strain. Shear Modulus is a value that can be used for measuring the ability of a material to withstand shear stress. Shear Modulus is also defined as the modulus of rigidity. Mathematically:

G, shear modulus
τ, shear stress
γ, shear strain

For the most metals we can approximate the Shear Modulus, G, using Young's Modulus, E, by using the formula:

RESOURCES:

References

Images

https://fr.wikipedia.org/wiki/Fichier:Shear_scherung.svg

Mathematical equations used in this article, where made using quicklatex.

Previous articles of the series

Rectlinear motion

Velocity and acceleration in a rectlinear motion -> velocity, acceleration and averages of those
Rectlinear motion with constant acceleration and free falling -> const acceleration motion and free fall
Rectlinear motion with variable acceleration and velocity relativity -> integrations to calculate pos and velocity, relative velocity
Rectlinear motion exercises -> examples and tasks in rectlinear motion

Plane motion

Position, velocity and acceleration vectors in a plane motion -> position, velocity and acceleration in plane motion
Projectile motion as a plane motion -> missile/bullet motion as a plane motion
Smooth Circular motion -> smooth circular motion theory
Plane motion exercises -> examples and tasks in plane motions

Newton's laws and Applications

Force and Newton's first law -> force, 1st law
Mass and Newton's second law -> mass, 2nd law
Newton's 3rd law and mass vs weight -> mass vs weight, 3rd law, friction
Applying Newton's Laws -> free-body diagram, point equilibrium and 2nd law applications
Contact forces and friction -> contact force, friction
Dynamics of Circular motion -> circular motion dynamics, applications
Object equilibrium and 2nd law application examples -> examples of object equilibrium and 2nd law applications
Contact force and friction examples -> exercises in force and friction
Circular dynamic and vertical circle motion examples -> exercises in circular dynamics
Advanced Newton law examples -> advanced (more difficult) exercises

Work and Energy

Work and Kinetic Energy -> Definition of Work, Work by a constant and variable Force, Work and Kinetic Energy, Power, Exercises
Conservative and Non-Conservative Forces -> Conservation of Energy, Conservative and Non-Conservative Forces and Fields, Calculations and Exercises
Potential and Mechanical Energy -> Gravitational and Elastic Potential Energy, Conservation of Mechanical Energy, Problem Solving Strategy & Tips
Force and Potential Energy -> Force as Energy Derivative (1-dim) and Gradient (3-dim)
Potential Energy Diagrams -> Energy Diagram Interpretation, Steps and Example
Internal Energy and Work -> Internal Energy, Internal Work

Momentum and Impulse

Conservation of Momentum -> Momentum, Conservation of Momentum
Elastic and Inelastic Collisions -> Collision, Elastic Collision, Inelastic Collision
Collision Examples -> Various Elastic and Inelastic Collision Examples
Impulse -> Impulse with Example
Motion of the Center of Mass -> Center of Mass, Motion analysis with examples
Explaining the Physics behind Rocket Propulsion -> Required Background, Rocket Propulsion Analysis

Angular Motion

Angular motion basics -> Angular position, velocity and acceleration
Rotation with constant angular acceleration -> Constant angular acceleration, Example
Rotational Kinetic Energy & Moment of Inertia -> Rotational kinetic energy, Moment of Inertia
Parallel Axis Theorem -> Parallel axis theorem with example
Torque and Angular Acceleration -> Torque, Relation to Angular Acceleration, Example
Rotation about a moving axis (Rolling motion) -> Fixed and moving axis rotation
Work and Power in Angular Motion -> Work, Work-Energy Theorem, Power
Angular Momentum -> Angular Momentum and its conservation
Explaining the Physics behind Mechanical Gyroscopes -> What they are, History, How they work (Precession, Mathematical Analysis) Difference to Accelerometers
Exercises around Angular motion -> Angular motion examples

Equilibrium and Elasticity

Rigid Body Equilibrium -> Equilibrium Conditions of Rigid Bodies, Center of Gravity, Solving Equilibrium Problems
Force Couple System -> Force Couple System, Example
Tensile Stress and Strain -> Tensile Stress, Tensile Strain, Young's Modulus, Poisson's Ratio
Volumetric Stress and Strain -> Volumetric Stress, Volumetric Strain, Bulk's Modulus of Elasticity, Compressibility

Final words | Next up

And this is actually it for today's post!

Next time we will get into the Elasticity and Plasticity of common materials...

See ya!

Keep on drifting!